Deco Nano Wood Stove
The Deco Nano can heat up to 1,200 ft² with 45,000 BTU/h of maximum power. EPA certified at 1.8 g/h, this non-catalytic wood stove stands out with its modern design, its higher-than-average height and its practical storage space under the appliance. The bottom of its combustion chamber is deeper than other models in its category and allows a greater accumulation of ashes, and thus to be able to empty them much less frequently.
Included: pedestal with log storage, top air deflector, ceramic glass, cast iron door with adjustable hinges, ash lip, air damper
- Up to 5 hours burn time
- Up to 17" logs
- 1.55 ft³ firebox
- EPA certified
- Proudly made in Canada
- Limited lifetime warranty
- Certified for mobile home and alcove installation
Options: blower, thermodisc, firescreen, fresh air intake kit
Appliance performance (2)
|Fuel type||Dry cordwood (16" recommended)|
|Recommended heating area-ft² ()||250 - 1,200|
|Overall firebox volume-ft³||1.7|
|EPA loading volume-ft³||1.55|
|Maximum burn time ()||5 h|
|Maximum heat output-dry cordwood (3)||45,000 BTU/h (13.19 kW)|
|Overall heat output rate < (3) (4)||12,124 BTU/h (3.55 kW) to 26,700 BTU/h (7.83 kW)|
|Average overall efficiency (dry cordwood) (4)||74 % (HHV) (5)||79 % (LHV) (6)|
|Optimum overall efficiency (7) (8)||80 %|
|Optimum heat transfer efficiency (9)||79 %|
|Average particulate emissions rate (1)||1.8 g/h|
|Average CO (10)||74 g/h|
(1) This appliance is officially tested and certified by an independent agency.
(2) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
() Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
(3) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
(4) As measured per CSA B415.1-10 stack loss method.
(5) Higher Heating Value of the fuel.
(6) Lower Heating Value of the fuel.
(7) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
(8) Optimum overall efficiency at a specific burn rate (LHV).
(9) The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
(10) Carbon monoxyde.
|High-efficiency certified appliance||Yes, EPA 2020 approved|
|Maximum log length||17"|
|Log positioning||Loading over depth|
|Flue outlet diameter||6"|
|Size||18 1/2" W X 29 1/8" D X 32 1/2" H|
|Type of chimney||CAN/ULC S629, UL 103 HT (2100 °F)|
|Minimum chimney height (feet)||12'|
|Baffle type||High quality vermiculite|
|Approved for an alcove installation||Yes|
|Approved for a mobile home installation||Yes, with fresh air intake|
|Shipping Weight||281 lb (128 kg)|
|Door type||Single, glass with cast iron frame|
|Glass type||Ceramic glass|
|Glass surface – dimensions (Width X Height)||10 1/4" X 8 3/4"|
|Glass air-wash system||Yes|
|Overall dimension (Height)||32 1/2"|
|Overall dimension (Width)||18 1/2"|
|Overall dimension (Depth)||29 1/8"|
|Door opening – dimension (Height)||7 5/8"|
|Door opening - dimension (Width)||12"|
|Firebox – dimension (Height)||11 3/4"|
|Firebox – dimension (Width)||14 1/4"|
|Firebox – dimension (Depth)||19 1/8"|
|Firebox lined with refractory bricks for better heat distribution||Yes|
|Stainless-steel secondary-air system improving gas combustion||Yes|
|Steel thickness – body||3/16"|
|Steel thickness – top||1/4"|
|USA standard (emissions)||EPA|
|Canadian Standard (emissions)||CSA B415.1-10|
|USA standard (safety)||UL 1482, UL 737|
|Canadian standard (safety)||ULC S627|
|Tested and listed as per applicable standards||By an accredited laboratory (CAN/USA)|
Manuals & Guides
- Shipping/Estimated Delivery & Returns
- Drolet User Manuals & Warranty
- Price Match Guarantee
What are typical shipping & processing times?
Order processing time is 3-4 business days if the item is in stock.
Delivery takes 7-14 business days on average.
If a unit is not in stock, it will have a unique lead time depending on the SKU.
What are the return policies for buyer's remorse, damaged in transit, and defective items?
Damaged in transit: Do NOT ACCEPT the product if it's delivered with obvious damage. Deny the package and ask for a Return Authorization Number.
If there is no obvious damage on the packaging, check for damage inside the pallet. If there's any damage, note it on the Bill of Lading. If you receive it with concealed damage, it will be handled on a case by case basis. Please send an email to info@homebarselect with images of the damage within 48 hours of delivery. We will send further instructions.
It is your responsibility to prove the damage was made during delivery if you accept an obviously damaged shipment.
Defective Items: Manufacturer's defects will be handled according to the product's manufacturer warranty. Parts can be shipped to you, if a part is defective. If the whole unit is defective, we may ask you to ship it back to the warehouse. Item must be unused and in it's original packaging. The package will assessed upon receipt. If it's in acceptable condition, the customer will receive a refund/exchange.
Buyer's Remorse returns are not accepted.
We work very hard to ensure that we offer the best prices online. If you find another legitimate online store that offers a lower prices on an identical item we stock (including shipping, tax, etc), we will match the competitor's price and provide superior customer service.
Please give us a call, email, or live chat with the price and link to the product.
**We DO NOT price match with large retailers such as Home Depot, Sams Club, Costco, Ebay, etc.**
**We will not match pricing on products being sold under Minimum Advertising Price guidelines**
- Promotions such as rebates and buy one, get one free offer are not eligible
- The item must be in stock on the competitors' website
- The competitor must be an online store, they may not have a retail location
- The website can not be a discounter or auction website (ie; eBay, overstock, etc..)
- The competitor must be an Authorized Retailer of the product in question, and must not be violating advertising price agreements with the manufacturer
- The Price Match Guarantee includes the item price and the shipping charges, it excludes sales tax
There may be brands excluded from that offer. Please contact us for further information.